|
News | Publications |
 | Clean Technology 2011Chapter 9: Cleantech & Nanotech in Oil, Gas & Traditional Energy |
Thermo Catalytic decomposition of methane on Ni/SiO2 catalyst into pure hydrogen and carbon nanotubes | |
| Authors: | S. Sarashwat, K.K. Pant |
| Affilation: | IIT DELHI, IN |
| Pages: | 387 - 390 |
| Keywords: | methane decomposition, catalsyt, Ni/SiO2, hydrogen generation |
| Abstract: | The current methods of producing hydrogen are based on steam methane reforming (SMR), coal gasification, electrolysis, biomass gasification and thermochemical processes A comparison between the cost of hydrogen production from renewable energy, and fossil sources, shows that hydrogen must be considerably reduced from present levels before this type of hydrogen becomes economically competitive. Currently, the process based on SMR and methane partial oxidation generates large quantities of CO2; the estimated GHG potential of hydrogen production by the SMR process is approximately 13.7 kg CO2 (equiv.)/kg of hydrogen produced. Thermocatalytic decomposition of methane is a promising approach to produce COx-free hydrogen and carbon nanotubes at a relatively low cost through a single -step process. This decomposition helps to reduce green house gases by co-producing valuable carbon products such as carbon nanotubes or graphite-like carbon. The current research on methane decomposition is widely focusing on the suitability of catalyst system and the reaction conditions for optimizing the production of hydrogen and carbon nanotubes. The appropriate metal-support interaction plays vital role for improving the catalyst activity and selectivity of the carbon nanotubes for lower activation energy consumption. Ni catalysts supported on silica as textural promoter prepared by wet impregnation and co-precipitation methods are studied to produce pure hydrogen and carbon nanofibers in a fixed-bed quartz reactor at 700 0C and at atmospheric pressure. The loading amounts of Ni in the Ni/SiO2 catalyst were changed from 30 to 70 wt%. The TCD activity is mainly influenced by the amount of metal loading, catalyst preparation method, reaction temperature and type of support material. It was observed that the catalytic activity and the yields of hydrogen and carbon nanofibers depended strongly on the loading amount of Ni. 50% Ni/SiO2 catalyst prepared by wet impregnation method found more suitable in terms of higher methane conversion and hydrogen yield compare to other catalyst |
 | |
| ISBN: | 978-1-4398-8189-7 |
| Pages: | 438 |
| Order: | Online/Mail/Fax Ordering Options |
| Indexes: | Keywords, Authors, Affiliations |
| Up |
Featured Events
2013 Asia Pacific Clean Energy Summit & Expo
(joint with 2013 Islands & Isolated Communities Congress)
Honolulu, Hawai'i, September 9-11, 2013
2013 Defense Energy Summit
Austin, TX, November 11-13, 2013
Cleantech 2014
(joint with TechConnect World)
Washington DC,June 15-19, 2014
- Patrick J. Piper, QM Power, Inc.
- Michael Newell, Ener-G-Rotors, Inc.
- Dr. Ray O Johnson, Senior Vice President and Chief Technology Officer, Lockheed Martin
